|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BRISTOL S.G. ACCESSORY ITEMS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BRISTOL S.G. MODEL BP1-2 ......... 2 LIGHT INDICATOR
BRISTOL S.G. MODEL BP1-3 ......... 3 LIGHT INDICATOR |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
2 and 3 light indicators are designed to give long-lasting, reliable service and are compact enough to install in almost any area. When used with a compatible Bristol actuator, the 2 light version gives an indication of when the actuator output shaft reaches its extreme end positions. The 3 light indicator also shows when the actuator output shaft is in motion. The lights are inset slightly from the face so they maintain their brightness and visibility even in bright light. They are available with red, yellow and green lights in any combination. See image at right for ordering details.
|
|
|
|
|
|
BP1-2 / BP1-3 SERIES TECHNICAL SPECIFICATIONS
| Mounting Flange Dimension |
0.5 inch X 1.75 inch
(13 mm X 44.5 mm) |
| Housing Dimension |
Length = 1.15 inch (29.2 mm)
Width = 0.4 inch (10.2 mm)
Depth = 1.0 inch (25.4 mm) |
| Housing Material |
6/6 Nylon |
| Voltage (wired for actuators) |
10-14 VDC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
BRISTOL S.G. MODEL BP2 ......... NEEDLE TYPE POSITION INDICATOR |
|
|
|
|
|
|
When used with a compatible Bristol actuator, this compact analog meter will give a fully proportional reading of the actuator output shaft position. Three wires as small as 28 gage will connect it to the actuator. It can be mounted horizontally or vertically.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
MODEL BP2 TECHNICAL SPECIFICATIONS
| Mounting Flange Dimension |
1 inch X 1.75 inch
(25.4 mm X 44.5 mm) |
| Housing Dimension |
Length = 1.6 inch (40.6 mm)
Width = 0.9 inch (22.9 mm)
Depth = 1.8 inch (45.7 mm) |
| Housing Material |
6/6 Nylon |
| Voltage (wired for actuators) |
10-14 VDC |
|
|
|
|
|
|
|
|
|
|
|
|
|
BRISTOL S.G. MODEL BP3 ......... LED TYPE POSITION INDICATOR |
|
|
|
|
|
|
When used with a compatible Bristol actuator, the BP3 LED indicator will give an indication of the actuator output shaft location. It is easy to mount and takes up very little panel space. For best viewing it should be used for inside or shaded outside applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
MODEL BP3 TECHNICAL SPECIFICATIONS
| Mounting Flange Dimension |
0.75 inch X 1.75 inch
(19 mm X 44.5 mm) |
| Housing Dimension |
Length = 1.15 inch (29.2 mm)
Width = 0.65 inch (16.5 mm)
Depth = 1.05 inch (26.7 mm) |
| Housing Material |
6/6 Nylon |
| Voltage (wired for actuators) |
10-14 VDC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BRISTOL S.G. MODEL BS2 ......... ROCKER SWITCH |
|
|
|
|
|
|
|
|
The Bristol S.G. BS2 rocker switch is comprised of two completely separate SPDT snap-action switches within one housing. It has a center-off position with a positive snap-action in two directions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
MODEL BS2 TECHNICAL SPECIFICATIONS
| Mounting Flange Dimension |
1 inch X 1.75 inch
(26.6 mm X 44.5 mm) |
| Housing Dimension |
Length = 1.15 inch (29.2 mm)
Width = 0.9 inch (22.9 mm)
Depth = 0.8 inch (20.3 mm) |
| Housing Material |
6/6 Nylon |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BRISTOL S.G. MODEL BC8 ......... CLEVIS ASSEMBLY |
|
|
|
|
|
|
|
|
|
Clevis fork with 1/8” pin and hardware. Clevis end is tapped with an 8/32 thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
MODEL BC8 TECHNICAL SPECIFICATIONS
| Clevis Dimension |
1.5 inch X 0.4 inch
(38.1 mm X 10.1 mm) |
| Clevis Material |
Glass Fibre Reinforced Nylon |
|
|
|
|
|
|
|
|
|
